SELEGUIDE 9000 sensors

SELEGUIDE 10K

SELEGUIDE 10K sensors. 

TLS 10K: new optical sensor for reading the printed line and the contrast, equipped with LCD touch screen display through which the operator can easily perform all operations and the calibration procedure.

The touch screen also allows the operator to control in real time the reading of the material. The sensor discriminates the line or the ideal contrast depending on the operator's choices. The consistency of the signal is further guaranteed by the new control algorithm able to accurately measure the width of lines and contrasts. The new line scan array sensor ensures exceptional performances even with interrupted lines or any other lines near the selected one.

TECHNICAL FEATURES TLS 10K

  • LCD touch screen interface
  • Led light technology
  • Line and contrast control
  • Suitable for opaque and reflective materials
  • Spot light pointer
  • Proportional band: 20 mm
  • Quick calibration set-up
  • Interrupted line and contrast control
  • Multiple lines scanning
  • Electric noise protection
  • Auto-calibration procedure
  • Suggested web-sensor distance: 20 mm
  • RS-485 connection
  • Power supply: 24V

TSB: optical sensor for reading a printed line or a contrast. The error is detected by one hi tech LED linescan array sensor with the automatic gain adjusting for the background. TSB sensor is supplied with a red pointer to show the center reading on the line/contrast. The auto-calibration procedure obtain the starting contrast directly on the line/contrast. The zero is settable from the operator panel in order to change the offset level. In the most advanced systems the scanning head is motorised.

TECHNICAL FEATURES TSB

  • Led light technology
  • Line and contrast control
  • Automatic gain adjusting
  • Sensitivity 0,01 mm
  • Max correctable error +/- 10 cm
  • Proportional band +/-9 mm
  • RS-485 connection
  • Power supply: 24V

p>SG10K big

TUS: sensor for reading the edge of the material. The error is detected by the ultrasonic sensors. The auto-calibration procedure obtains the starting tension levels for the different materials. The zero is settable from the operator panel in order to change the offset level. In the most advanced systems the scanning head is motorized and it is possible to have the center control by using two motorized sensors. TUS sensors are also delivered on request with longer forks.

TECHNICAL FEATURES TUS

  • Ultrasound technology
  • Edge control
  • Suitable for contrasted and transparent materials
  • Proportional band: 20 mm
  • Electric noise protection
  • Insensitive to dirt
  • Distance of beams: 50-100 mm
  • Automatic level adjusting
  • Sensitivity 0,01 mm
  • Max correctable error +/-10cm
  • Proportional band +/-9mm
  • RS-485 connection
  • Power supply: 24V
  • Longer forks on request

seleguide 9000 sensori interna02

TIR: sensor for reading the edge of the material. The error is detected by the infrared sensors. The auto-calibration procedure obtains the starting tension levels for the different materials. The zero is settable from the operator panel in order to change the offset level. In the most advanced systems the scanning head is motorized. TIR sensors are also delivered with longer forks and with a cleaning protection device with air flow on request.

TECHNICAL FEATURES TIR

  • Infrared technology
  • Edge control
  • Suitable for non-woven, tissue, napkins, diapers
  • Proportional band: 20 mm
  • Electric noise protection
  • Distance of beams: 50-100 mm
  • Automatic level adjusting
  • Sensitivity 0,01 mm
  • Max correctable error +/-10cm
  • Proportional band +/-9mm
  • RS-485 connection
  • Power supply: 24V
  • Cleaning protection device with air flow on request
  • Longer forks on request

SELEGUIDE10KsensoreTIR

MOTORIZED SENSORS

 

News & exhibition

  • aarkins

    Canada: distribution partnership with AARKINS Automation and Resourse Partners

    Read more ...
  • logo P4a CLAIM ITA bianco

    VISIT OUR STAND!
    HALL 18 STAND K05

    Read more ...
  • 2017 10 24 PHOTO 00000806
    OUR PARTICIPATION AT LABELEXPO 2017

    Read more ...
  • Labelexpo Europe 2017 Selectra

    SELECTRA AT LABELEXPO 2017: SELECT your future

    (Hall 7 stand E34)

    Read more ...

We use cookies on this site to enhance your user experience